Deleted Zsight When Added the App Again Says Device Already Linked to Another Account

Use the main menu to admission all of the total features of the NVR. The following chapter volition explain how to navigate and perform the features through the menu.

General Settings

Use the General Settings menu to manage accounts, modify the date & time, modify the live-video streaming options and settings, view the system events log, view hard disk information, view and upgrade your firmware and restore your device to factory settings.

Account Management

This NVR supports multiple user profiles with different permissions, which allow you to share video surveillance without worrying most unpermitted tampering with the arrangement settings, playback files, etc.

The system tin support up to 16 accounts, with two different account types:

Administrator: Has full access to all features of the NVR and full permission to change all settings.

Operator: Can only view the live-video stream.

Managing your user accounts by simply highlighting a user account from the bill of fare and selecting a function to perform.

Date & Language

Use this menu to change the date & time settings and the language settings of your NVR.

NTP Enabling the Network Time Protocol (NTP) allows the system to automatically set the date and time of your organisation. This requires an internet connection.

Sync Photographic camera Time The NVR will automatically update your photographic camera's date and time settings to match that of your NVR.

Language Choose a different linguistic communication for your NVR system to display.

Display Settings

The NVR offers several options to best customize the content displayed on the home-screen of your NVR.

Channel Select a aqueduct display to customize. Each channel tin display a specific channel name and the current fourth dimension.

IMPORTANT: When changing the settings on a channel, printing [Save] before editing some other channel or exiting the page otherwise all changes volition be lost.

Channel Name You may fix a name to describe the camera feed on your NVR. For example, if yous have set up a camera in the front yard on channel 1, you could name information technology "Front One thousand".

Channel Time Select this option to brandish the current engagement and time on the channel feed.

Enable Automobile Sequence Selecting this pick will activate sequential viewing. In sequential viewing, the NVR volition automatically cycle betwixt certain channel feeds. You may change the duration of each sequence and select which feeds to cycle through nether this menu.

System Log

The NVR will provide notifications when certain events occur. Such events could exist, just are not limited to: a missing hard drive or difficult drive failure, activated movement sensors, activated alarms, etc. Apply this carte du jour to review the system log of all consequence notifications.

Serial Numbers the events in sequence

Blazon Describes the blazon of notification (Alarm / System)

Commencement Time The time when the event occurred.

Event Gives detailed clarification of the notification, due east.yard. Mo = Move; 02 = motion captured on channel 2; alert = type of notification.

Disk Drive Info

This carte du jour allows you to review important HDD data, format HDD'due south and change it's settings.

Hd Full Defines how the NVR will behave when the HDD is full. When the HDD has reached its storage capacity, the NVR will either terminate recording or overwrite the older playback files. The overwrite feature is generally recommended.

Refresh Update the HDD information shown on the folio.

Total Space The total available storage space on the HDD in the NVR.

Free Space The corporeality of storage infinite left on the HDD in the NVR.

Format In society to format a drive, select information technology from the carte du jour and printing [Format]. The system will automatically format the HDD.

Arrangement Settings

Utilize this menu to view and change basic settings and information of the NVR. From this card, you may enable the startup guide, change the display resolution, view arrangement information, upgrade the NVR firmware and reset the system to factory default settings.

Startup Guide Check this box to enable the startup guide to appear (refer to three.iii NVR First-time Startup). The startup guide will appear the next fourth dimension the arrangement is powered on.

Please refer to the following instructions to upgrade the firmware from the system (required: a USB drive).

1. Download the updated firmware from the website on your reckoner.

2. Place the file onto the root directory of a USB drive.

three. Connect the USB drive to the USB port on your NVR.

4. Go to the [General Settings] bill of fare in the Main Menu and access the [Organization Settings] page.

5. Select [Upgrade] and wait 5-10 minutes.

Help&FAQ

Funlux offers comprehensive support for our users. This page provides links to some of our resource that will assist guide yous to a maximal feel of our products. For support , delight visit http://www.funlux.com/support.html

Device Direction

Utilize the Device Management bill of fare to manage the IP cameras connected to the NVR.

Add together Device

Search and Add together All Devices Automatically Bank check this box to enable the automated search and add together functions of the NVR. If there are empty channels, the NVR will automatically search and add nearby cameras.

Please await 3-five minutes for this process to be completed.

Search for Devices Select to search for devices with the same protocol. A pull up menu will appear for you to manually select the devices to add together.

Machine Add Volition prompt the system to automatically search for and add devices.

Add Device Manually Allows y'all to add a specific device past inputting the MAC address and port information.

Refresh Refresh the page to update camera information.

Delete Device Select a channel and printing [Delete Device] to remove the camera assigned to the corresponding aqueduct.

Adding a device:

You lot will have four options different methods to add together a device:

1) The system will automatically search for and add devices if y'all leave the [Search and Add All Devices Automatically] option selected.

2) Prompt the arrangement to automatically search for and add together devices by selecting [Automobile Add].

3) Press [Search for Devices] to open a list of bachelor cameras and manually select the desired cameras to add to the system.

four) Press [Add Device Manually] to add the device past inputting the specific MAC address of the continued photographic camera.

Video Stream Settings

Adjusts the video quality, frame rate, resolution and streaming bit rate

Channel Choose the channel that you would like to alter the settings for.

IMPORTANT: When changing the settings on a channel, printing [Save] before editing another channel or exiting the folio otherwise all changes volition be lost.

Local Video Stream Changes the video streaming settings for devices that are connected to the NVR locally (devices that are connected to the aforementioned internet connection as the NVR).

Network Manual Stream Changes the video streaming settings for devices that are continued to the NVR remotely (devices that are connected through 3G/4G or a different internet connection than the NVR).

Video Quality Alter the overall quality of the video. Increasing the quality as well increases the bandwidth used.

Frame Rate (FPS) This changes the number of pictures (frames) per second that brand up the video stream. The college this value, the smoother and better the video quality is, yet increasing this value too increases the bandwidth.

Resolution Change the resolution of the video stream. QVGA=320x240.

Streaming Flake Rate This is the type of bit rate that the NVR uses to view video from the camera. VBR stands for the variable bit charge per unit, and CBR stands for the constant scrap charge per unit—CBR is college quality than variable, however it uses more bandwidth.

Video Mask

The NVR allows y'all to mask / hide certain areas of your photographic camera feed from recording and monitoring.

To create an area to mask you must get-go select the channel to edit and cheque [Enable]. Select an area by clicking and dragging downwards and to the right with your cursor. A grey box volition appear. Remove the selected areas past correct-clicking on the box. After y'all are done, press [Save] and proceed to other channels or render to the home-screen.

Network Settings

Bones Settings

Selecting DHCP will let the NVR to manually configure the IP address and network parameters.

The settings on this page enable access to the NVR over the internet. Unless you lot are an advanced user, we do not recommend that you change these settings. These definitions are non sufficient for manual networking and configuration.

Web Port This designates the port used when accessing the NVR through a spider web browser.

Video Port This designates the port that the video feed is transmitted over.

Mobile Port This designates the port used when accessing the NVR through a smart phone or mobile device.

DDNS

NOTE: For avant-garde users only. Router port-forwarding is required. Employ this page to ready a DDNS (Dynamic DNS Server) for remote surveillance, please refer to the knowledge base of operations for full instructions.

UPNP

UPNP (Universal Plug and Play) is a protocol used to establish network connectivity and interaction between devices. Enabling this feature will let easier network connectivity.

Notation: The UPNP settings for the device are not the same as the UPNP settings on your router and do not pose the aforementioned security risks.

NOTE*: For advanced users only. We do not recommend that you change whatsoever settings under this page without prior networking knowledge. Issue Direction

This NVR system is specialized for 24/7 continuous recording, and volition automatically marker recordings that are triggered past "critical events" (movement detection and alarms) in the playback menu. Use this card to ascertain "critical events" and best optimize recording and storage on the system.

Record Mode

The organization has 2 available recording modes:

The basic recording contour will record continuously at total frames. This means that all recorded video files will exist high quality, and the HDD will be able to store less footage at i fourth dimension.

The intelligent recording profile will automatically manage the recording to optimize storage capacity. During scenes of involvement when "critical events" are triggered, the NVR will automatically record in full frames to ensure higher quality. During stationary scenes, the NVR volition record at a lower framerate to optimize storage capacity.

Move Detection

This NVR supports advanced motion detection features for bolstered security. Please follow the post-obit instructions in order to properly configure and setup the motion detection functions.

Of import: When irresolute the settings on a channel, press [Save] before editing another channel or exiting the page otherwise all changes will exist lost.

ane. Choose a channel to edit. Select a aqueduct under the dropdown menu next to [Channel] and select the box next to the aqueduct in gild to turn on motility detection.

2. Customize schedules for movement detection. The NVR allows you to prepare to 4 dissimilar time periods for move detection. To activate a time period, input the desired values and select the box to the right of the corresponding time period.

a. You can either manually configure a schedule for each twenty-four hour period by selecting the twenty-four hours in the [Week] dropdown menu, or you can apply the schedule to multiple days at in one case by selecting [Apply to].

b. Once changes have been fabricated, always printing [Salve] before navigating to some other page or editing schedules for some other day otherwise the changes will lost.

3. Select the motility detection area. Using the move detection grid, define a motion detection area by left-clicking on a square. Click-and-drag to toggle large areas. You may adjust the sensitivity of the motion detection with the [Sensitivity] drop-downwardly carte du jour.

iv. Define how the system responds when movement is detected. There are four different responses that the system tin take when motion is detected. Note: The arrangement volition automatically tape video when motility is detected.

a. "Alarm Sounding Buzzer" The NVR'southward born buzzer will sound.

b. "Alarm Output" The NVR will activate any external alarms that have been connected to the back panel (see: 3.i NVR Installation – Connecting an External Alert).

c. "Alarm Duration" volition adjust how long both the cablegram and the alarm output will sound after motion is detected. NOTE: The alarm will sound continuously while move is beingness detected.

d. "Snapshot" The NVR will take a snapshot and ship it to your mobile device and electronic mail address (when configured).

e. "Transport E-mail" The NVR will send an email notification. The NVR comes with predefined server settings for common service providers, notwithstanding you lot may need to specify your own settings if your provider is non included. Choose an electronic mail address using the specified service provider to send the email and input the respective password to the existing email accost.

f. "Alarm Interval" This setting defines the interval betwixt motion detection notifications. For example, when set to ane infinitesimal, the NVR will send an electronic mail notification every infinitesimal when move is detected.

5. Salvage and and so select some other channel to configure. If you do not save prior to selecting another channel, all changes will be lost. You may also restore setting defaults by pressing [Default].

External Alarm

The NVR supports upwards to four external alarm inputs and i external alarm output. External alert inputs may include, but are not express to motion detectors, trip wires, door sensors, etc. External warning outputs may include, merely are non express to sirens, visual alarms, silent alarms, etc.

Please follow the post-obit instructions to properly configure the external alarm features.

Important: When changing the settings on a channel, press [Relieve] before editing another aqueduct or exiting the page otherwise all changes volition be lost.

one. Choose an warning to edit. In the dropdown menu, choose an alarm and select [On] to enable the alarm input. Choose the type (normally open or unremarkably closed) that describes your specific alarm.

2. Customize the agile period for your warning. The NVR allows y'all to fix to four different time periods in which your alarm will be considered active. To activate a time period, input the desired values and select the box to the right of the respective time flow.

a. You can either manually configure a schedule for each solar day by selecting the solar day in the [Calendar week] dropdown menu, or you tin can apply the schedule to multiple days at in one case by choosing the [Employ to].

b. One time changes have been made, e'er printing [Relieve] earlier navigating to some other page or editing schedules for another 24-hour interval otherwise the changes volition lost.

3. Define how the organisation responds when an alert is triggered. In that location are three possible responses when an alarm is triggered. Choose an choice past selecting the box adjacent to it. NOTE: The arrangement will automatically tape video when an alarm is triggered.

a. "Buzzer" The NVR's built-in buzzer volition audio.

b. "Alert Output" The NVR will activate any external alarms that have been continued to the back panel (see: three.1 NVR Installation – Connecting an External Alarm).

c. "Alarm Duration" volition adjust how long both the buzzer and the alarm output volition sound after motion is detected.

d. "Send Eastward-postal service" The NVR volition send an e-mail notification. The NVR comes with predefined server settings for common service providers, even so you may need to specify your ain settings if your provider is non included. Choose an email address using the specified service provider to send the email and input the corresponding password to the existing electronic mail accost.

Alarm Input Select the channel of the input alert that yous would like to edit. Select "On" to enable this warning.

Blazon Select the blazon of alarm that you are using. Please refer to your alert's manual if y'all are unsure of this.

WWhen on the home screen, you can access the NVR'due south camera controls by double-clicking on the desired channel feed and a blue carte volition announced equally shown. The icons represent the three control features: prototype settings, zoom, and playback.

Epitome Setting

This volition adjust the image settings of the camera from the NVR. Annotation: This will affect everyone continued to the NVR.

Image Orientation: Change the image orientation."Flip" will flip the image vertically, "Mirror" will flip the prototype horizontally, and "Flip and Mirror" volition apply both functions.

Starting time Icon: Conform the brightness settings of the camera.

Second Icon: Adjust the colour saturation of the camera.

3rd Icon: Adjust the contrast settings of the camera.

Zoom

Selecting this volition bring you into the zoom-in mode. Use the whorl bike to zoom in and out, and click on areas of the screen in the bottom right corner to select viewing areas. Correct click to exit out of the view.

Playback

Access and review your surveillance footage from this menu.

Video Playback

1. Select the channel of your recording on the correct console under "Channel". When you select a channel, information technology will be highlighted in blue.

2. Select the month and twelvemonth on the calendar in the correct panel. The days that are highlighted in blue will have recordings available. Select one of the days.

3. Use the Playback Controls to playback video.

Fill-in

The system allows you to fill-in specific files from your machine onto an external USB bulldoze. The post-obit instructions will bear witness yous how to find specific files on your system to backup.

1. Select the channel of your recording on the right panel under "Channel". When you select a aqueduct, it will be highlighted in blueish.

two. Once a channel is selected, select a month and twelvemonth on the agenda. The days that are highlighted in blue volition have available recordings. Select one of the days.

3. Under "Event" choose which type of recording that you desire to search for. You can choose normal, alarm triggered or motion triggered recordings only, or you lot tin choose all recordings.

4. Choose the fourth dimension frame that your recording will fall under. For example, if you are looking for a video file that was recorded at iii:00 a.m. you will specify the fourth dimension frame 0:00-6:00.

5. Press [Search]. If your NVR has saved whatsoever recordings during this time frame, they will appear in the menu.

vi. Select all of the videos that yous would similar to dorsum upwards, and press [Back up]. Wait for the progress bar to consummate for each video file.

7. Repeat steps 1-7 for video files under different channels, days, events, fourth dimension frames, etc.

erlandsonnaal1948.blogspot.com

Source: https://www.funlux.com/wireless-wired-kit-user-guide?pro_id=4884/

Share this post